APPLICATION

Thin-layer cement-based mortar intended for masonry with aerated concrete blocks.

PREPARATION AND APPLICATION

The surface on which the mortar is applied must be firm, clean and flat. The preparation is done by adding powder in about 24-26% of water (6-6,5 l of water for 25 kg of product) with intensive stirring until complete homogenization. Leave the mass to stand for about 10 minutes, then stir once more to obtain a mortar of appropriate density and without lumps. Apply the glue with a notched trowel on the upper surface of the blocks and on the side surfaces in order to connect the blocks. The maximum thickness of the glue is 10 mm.

OPTIMAL WEATHER CONDITIONS

Substrate and air temperature + 5 ° C to + 25 ° C.

CONSUMPTION

12-13 kg/m2/cm, depending on the application thickness.

SHELF LIFE AND STORAGE

12 months in the original packaging in a dry room on pallets.

PACKING

25 kg