Silicate dispersion for exterior walls


Consumption Calculator

You need kg of this product


Silicate dispersion paint for protection and decoration of exterior and interior wall surfaces, characterized by excellent vapor permeability and good coverage. Due to the specific method of bonding to the substrate, it is suitable for use in the restoration of the facade surfaces of old buildings and cultural monuments. Resistant to UV radiation and atmospheric influences. Possible to tint according to the Bekament color charts with limited color choices.


The substrate to which the paint is applied must be solid, clean, dry and coated with BK-GrundSilicat primer. The preparation of the paint is performed by adding about 10% of water (0.5 l of the water for the packaging of 5 kg, 0.8 l of the water for the packaging of 8 kg, 2.5 l of the water for the packaging of 25 kg), with good stirring until complete homogenization. BK-FasSilicat is usually applied with a long-hair roller in two coats. The second layer is applied after complete drying of the first, which under normal conditions (T=+23-25 ºC, relative humidity=50-60%) requires 4-6 h. It is necessary to work evenly and without interruption on continuous surfaces. High humidity and low temperatures can prolong the bonding time and affect the uniformity of shade. Protective curtains must be used during application. See product datasheet for more detailed instructions.


From +15°C to +30°C, relative humidity max. 70%. Do not work under direct sunlight, rain or strong wind.


12 months in original sealed packing. Store at temperatures from +5 to +25°C, protected from direct sunlight and frost.


Approx. 0.35 kg/m² in two coatings, depending on the absorbency of the substrate.


5 kg; 8 kg; 25 kg


When applying BK-FasSilicat, it is necessary to protect the surfaces with protective curtains to allow even drying of the coat and to prevent staining.