Water repellent grouting compoung
High-quality, water-repellent grouting compound for ceramic and glass tiles, as well as artificial and natural stone boards, on horizontal and vertical surfaces. Designed for joints up to 10 mm wide, for indoor and outdoor use. Resistant to the emergence of mold. Available in 24 shades.
PREPARATION AND APPLICATION
Before grouting joints should be cleaned from adhesive and dust. In case of highly absorbent tiles and when working at high temperatures, wet the joints 1 hour before grouting. The preparation is carried out by the gradual addition of product in about 30% of water ( 600 ml of water for 1 kg of powder), with constant stirring until complete homogenization. Use prepared compound within 1 hour. The application is performed with a rubber trowel, at an angle of 45°, so that the joint is well filled with grout. After 20-30 minutes, when the surface of the compound has cured, wipe the tiles with a damp sponge in a diagonal direction across the tiles, then polish with a dry cloth. Floor tiles can be stepped on at least 8 hours after grouting, when dried under normal conditions. See product datasheet for more detailed instructions.
From +5°C to +25°C. High humidity and low temperatures can significantly extend the grout curing time.
In case of grouting porous tiles, a test grouting is recommended. If the adhesive is not sufficiently dry, there is a possibility of discoloration of the grout. The grout is not suitable for natural stone susceptible to discoloration.
Approximately 0.3-0.8 kg/m², depending on the joint width and tile size.
SHELF LIFE AND STORAGE
24 months in original packaging in dry room on pallets.