BK-GletEx Premium

Thick-layered compound for interior walls leveling

BK-GletEx Premium

Consumption Calculator

You need kg of this product


Lime based skimming compound for leveling out interior walls. Due to the possibility of thicker application, BK-Gletex Premium is particularly suitable for leveling rough walls with cement-lime, lime and gypsum-lime mortars, as well as for leveling concrete and gypsum cardboardwalls.


The substrate to which BK-GletEx Premium is applied, must be solid, clean and dry, without loosely bonded parts, grease stains, etc. In case of application to high-quality mineral surfaces as well as to well-set dispersion paints, it is necessary to previously apply BK-Ultra Prime primer, in order to achieve better adhesion of the skim coat. In case of highly absorbent surfaces, impregnation with BK-Nivelator can be performed. In case of peeled off, worn and/or dusty surfaces, all loosely bonded layers must be removed and then impregnated with BK-Penetrat. The preparation of the compound is done by adding the powder in about 40% of water (10 l of water for 25 kg of product) to achieve a homogeneous mixture, without lumps. Allow the mixture to rest for 10 minutes and stir once more before application. The compound is usually applied in two layers, by hand, with a metal trowel, with a total thickness of up to 6 mm. The second layer is applied after complete drying of the first one, and after each layer the possible folds should be processed with sandpaper, with grain size 180-240 depending on the technique and purpose. See product datasheet for more detailed instructions.


Approximately 1-1.5 kg/m², depending on the thickness of the application.


12 months in original packaging in dry room on pallets.


25 kg