BK-GletEx S Acryl

Acrylic-based exterior wall leveling compound

BK-GletEx S Acryl

Consumption Calculator

You need kg of this product


Ready-to-use skimming compound with microfibers for machine and manual thin-layered leveling of exterior walls.


The substrate to which BK-GletEx S Acryl is applied, must be solid, clean and dry, without loosely bonded parts, grease stains, etc. In case of application to high-quality mineral surfaces as well as to well-absorbed dispersion paints, the substrate must be previously coated with BK-Podloga in order to achieve better adhesion of the skim coat. In case of highly absorbent surfaces, impregnation with BK-Nivelator can be performed. In case of peeled off, worn and/or dusty surfaces, all loosely bonded layers must be removed and then impregnated with BK-Penetrat.
BK-GletEx S Acryl is a ready-to-use product. Prior to use, it is advisable to stir the compound and if needed add max 1-2% of water to adjust the usage consistency, which is usually the case for machine application. The compound is usually applied in two layers, with a steel trowel, with a total thickness of up to 3 mm. After machine application, manual leveling of the surface with a trowel is performed in order to remove excess material. The second layer is applied after complete drying of the first one, and after each layer the possible folds should be processed with sandpaper, with grain size 80-180 depending on the technique and purpose. See product datasheet for more detailed instructions.


From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind.


Approx. 1. 5-2 kg/m².


Up to 12 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.


8 kg; 25 kg