BK-HidroStop 1

One-component, waterproofing coating for horizontal and vertical protection of surfaces from moisture

BK-HidroStop 1

Consumption Calculator

You need kg of this product


One-component, waterproofing coating for horizontal and vertical protection of surfaces from moisture. It is used for waterproofing of potentially damp rooms: kitchens, bathrooms, showers, swimming pools, basements, terraces, etc. It is intended for indoor and outdoor use, for positive and negative water pressure ≤1,5 bar. The material is not intended for surface finishing or for systems that are in permanent contact with water.


The substrate to which BK-HidroStop 1 is applied must be solid, dust-free, free of grease, mold and loosely bonded parts. Before applying waterproofing, it is advisable to apply the BK-Ultra Prime primer diluted according to the instructions. In case of old and unevenly absorbent substrates, as well as in the case of porous high absorbent substrates, it is necessary to coat the substrate with diluted BK-Ultra Prime, min. 4h before waterproofing. In case of peeled off, worn and/or dusty surfaces, all loosely bonded layers must be removed and then impregnated with BK-Penetrat. It is necessary to thoroughly wash the concrete surfaces with hot water in order to remove the impurities present and then coat with BK-Beton Kontakt. The preparation of the compound is performed by lightly mixing the powder 20 kg with 6 l of water until complete homogenization . Allow the compound to rest for about 5 minutes and stir again. Use prepared compound within 2 hours. The coating is applied by brush in two coats, by crossing motions, until the surface is completely covered. The thickness of one coat is approximately 1 mm, and the second coat is applied after the surface curing of the previous.
Waterproofing coating should be protected from rapid drying. After 12 hours from the application of the last layer, the surface is ready for laying ceramics (for gluing use flexible adhesives SiproFix BK-110 Flex, BK-160 Super Flex, BK-155 Rapid White, BK-170 Elastic or BK-160 White). See product datasheet for more detailed instructions.


Approximately 1.2 kg/m2/mm, depending on the quality of the substrate.


12 months in original packaging in dry room on pallets.


20 kg