High quality acrylic decorative render in the form of paste, of high strength, water repellency and outstanding workability for indoor use.
RENDER STRUCTURE AND GRAIN SIZE
BK-IN PlastRajb – scratched structure, rille (grain size 1. 5 and 2 mm); BK-IN PlastFul – full structure, kratz (grain size 1, 1. 5 and 2 mm).
PREPARATION AND APPLICATION
The substrate to which the render is applied must be solid, clean, dry and coated with BK-Acryl primer. Mix BK-IN Plast before application and if necessary dilute with a small amount of water (1-2 %, 0.25-0.5l ). The render is applied with a steel trowel with thickness of the largest grain. Depending on the desired structure, the render is then processed with a plastic trowel, namely: Full structure – structured in a circular pattern immediately after application; Reib structure – after application scratch by circular motions until the desired structure is achieved. It is necessary to work evenly and without interruption on continuous wall surfaces. Possible to tint in accordance with Bekament color charts. See product datasheet for more detailed instructions.
It is necessary to equalize the material required for the continuous wall surface by mixing the contents of multiple bins.
From +5°C to +30°C. High humidity and low temperatures can significantly extend the render bonding time.
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.
Approx. 2. 3-3. 3 kg/m² depending on the structure and grain size.