BK-Liv 30

Quick-setting self-leveling compound

BK-Liv 30

Consumption Calculator

You need kg of this product


High-strength fast-setting self-leveling compound for leveling concrete surfaces,cement screeds / tiles and tiled surfaces before installing parquet, ceramics, PVC and other fl oor coverings, in residential, commercial and similar buildings. The product is not intended for a top coat. The thickness of the layer is 5-30 mm. It is used for interior and exterior surfaces (eg terraces or loggias in combination with BK-HidroStop waterproofi ng coatings). Suitable in underfloor heating system.


The substrate on which the mass is applied must be firm, clean, dusty, free of grease and poorly bonded parts. Before applying BK-Liv 30, coat the substrate with BK-Ultra Prime, while in the case of application on old ceramic tiles, use BK-Bond as a substrate. Substrate drying time is min. 4h. The preparation of the mass is done by adding powder in 19-20% of water, until complete homogenization. Leave the mass to stand for 5 minutes and then stir again. The mass is poured on the substrate in one layer using a suitable tool, and after pouring, it is desirable to coat the surface with a special needle roller (“hedgehog” roller), in order to expel air bubbles. Use the mixed mass within 45 min. See the product data sheet for detailed instructions.


About 1,5-1,7 kg/m2/mm.


12 months in original packaging in dry room on pallets.


25 kg