Acrylic dispersion with microfibers for exterior walls


Consumption Calculator

You need kg of this product


Silicone dispersion paint with microfibers for protection and decoration of new and old facade surfaces. It is made on the basis of high-quality silicone resins, provides excellent coverage and water repellency, good vapor permeability, is resistant to UV radiation and atmospheric influences. Due to its high resistance, it is also suitable for use on the interior walls of public facilities. This product provides good bypassing and filling of the thin cracks in the render (max. 0. 5 mm) and thus prevents subsequent cracks or visible transitions on the finished surfaces. Possible to tint in accordance with Bekament color charts.


The substrate to which the dispersion is applied must be solid, clean, dry and coated with BK-MicroGrund Universal primer. The preparation of the paint is performed by adding about 5-10% of water (0.25-0.5l of water for 5kg of packaging, 0.4-0.8l of water for 8kg of packaging, 1.25-2.5l of water for 25kg of packaging), with good stirring until complete homogenization. BK-MicroFas Silicon is usually applied with a long-hair roller in two coats by cross motions. The second layer is applied after complete drying of the first, which under normal conditions (T=+23- 25ºC, relative humidity=50-60%) requires 4-6 h. Work should be done evenly and without interruption on continuous surfaces with a “full roller” to avoid grouping of the filler in one place. See product datasheet for more detailed instructions.


From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind.


Up to 18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.


Approximately 0. 4-0. 45 kg/m² depending on absorbency and roughness of the surface.


5 kg; 8 kg; 25 kg


Before working with BK-MicroFas Acryl paint, it is necessary to make a good assessment of the wall surface. If it is a dry surface, first apply BK-Grund Universal in two coatings and then BK-MicroFas Acryl. If the wall surface has cracks, it is necessary to coat first with BK-MicroGrund Universal primer and then apply BK-MicroFas Acryl.