BK-Plast
Acrylic based façade render

Consumption Calculator
USE
Thin-layer decorative render, in the form of paste, made of high-quality acrylic emulsion, intended for the protection of facade wall surfaces. It is characterized by good adhesion to the substrate, excellent workability, high strength and water repellency.
STRUCTURE OF RENDER
reib (scratched-rille) and full (full-kratz).
PREPARATION AND APPLICATION
The substrate to which the render is applied must be solid, clean, dry and coated with BK-Acryl primer. Mix BK-Plast before application and if necessary dilute with a small amount of water ~ 1% ( 0.25l of water for 25kg). The render is applied with a steel trowel with thickness of the largest grain. Depending on the desired structure, the render is then processed with a plastic trowel, namely: Full structure – structured in a circular pattern immediately after application; Reib structure – after application scratch by circular motions until the desired structure is achieved. It is necessary to work evenly and without interruption on continuous wall surfaces. See product datasheet for more detailed instructions.
NOTE
It is necessary to equalize the material required for the continuous facade surface by mixing the contents of multiple bins.
APPLICATION TEMPERATURE
From +5°C to +30°C. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.
CONSUMPTION
Approx. 2. 3-3. 3 kg/m² depending on the structure and grain size.
SHELF LIFE AND STORAGE
18 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.
PACKAGE
25 kg.