Adhesive for bonding gypsum-cardboards
BK-PlasterFix is a gypsum based construction adhesive designed for fixing gypsum cardboards to wall surfaces.
PREPARATION AND APPLICATION
The surface to which adhesive is applied must be solid, clean and dry, with no loose parts, free of oil stains and similar. In case of very smooth surfaces, BK-BetonKontakt must be pre-applied. In case of highly absorbent surfaces, it is necessary to pre-coat with BK-Nivelator prior to bonding. The preparation is performed by adding about 39% of water (9.75 l of water for 25 of product) with vigorous stirring until complete homogenization. Allow the mixture to rest for 10 minutes and stir once more before application. Apply adhesive in dots along the edges and in the center of the gypsum cardboards, with a distance of about 30 cm. Alternatively, the adhesive can be applied in strips over the entire surface of the gypsum cardboard. See product datasheet for more detailed instructions.
The air and substrate temperatures during installation should be in the range from +5 ºC to +30 ºC.
Approx. 3. 5-4. 0 kg/m².
SHELF LIFE AND STORAGE
12 months in original packaging in dry room on pallets.