USE

1-component PUR Foam, hardens with moisture. Installation and gluing of windows, filling gaps (eg between blinds and walls), fi lling wall joints after installation of fi nished building elements, fi lling pipeline penetrations through walls and ceilings, fixing and insulating panels, corrugated panels, tiles, etc., fi lling electrical installations, antennas and pipes, crossings in the roof area. After drying, insoluble, waterproof, permanently elastic. It can be plastered, glued, coated or painted. Excellent adhesion to concrete, plaster, wall, wood and many plastic materials (polystyrene, solid PUR foam, polyester, hard PVC, except PE / silicone), even on wet surfaces. It is not suitable for underwater applications and fi lling large closed holes without the possibility of moisture entering. The foam does not adhere to surfaces such as polythylene, silicone, tefl on, grease and the like. Hardened PUR-Foam should be protected from UV rays by a coating or sealant. The car can be transported in a well-secured trunk – not in the back seat. Read the hazard instructions before use! Never heat the dose – risk of bursting! Remove fresh foam with PUR-Foam Cleaner.

PREPARATION AND APPLICATION

The surface must be solid, clean, free of grease and oil. Moisten well. Cover non-foam surfaces. Before applying, we recommend moistening dry substrates with water. Shake the dose vigorously. Screw the can onto the NBS threaded gun. Fill large joints in several layers and moisten between each layer. The time it takes to pass between two coats of foam is 15-30 minutes. Dispense sparingly, the volume of foam after application increases approximately twice. For cleaning and removing debris foam use BK-PU Cleaner while the foam is still soft. The hardened foam can only be removed mechanically, after which the surface can be further treated with mortars or acrylic sealants. See the product data sheet for detailed instructions.

APPLICATION TEMPERATURE

From +5°C to +35°C.

SHELF LIFE AND STORAGE

18 months. Store in a dry place in the original packaging at a temperature of +5°C to +25°C, protected from sunlight and frost.

STORAGE CONDITIONS

upright, dry and at a temperature between + 5 ° C and 25 ° C.

PACKING

750 ml