BK-S Plast

Silicate-based façade render

BK-S Plast

Consumption Calculator

You need kg of this product

USE

Thin-layer silicate decorative render in the form of paste intended for protection of facade wall surfaces. It is characterized by good adhesion to the substrate, excellent workability, high strength, non-combustibility and good vapor permeability. It is resistant to UV rays and atmospheric influences. Due to its characteristics, it is recommended for the restoration of old buildings and for the protection of cultural monuments.

RENDER STRUCTURE AND GRAIN SIZE

Rajb – scratched structure, rille ,
Ful – full structure, kratz

PREPARATION AND APPLICATION

The substrate to which the render is applied must be solid, clean, dry and coated with BK-GrundSilicat primer. Mix BK-S Plast before application and if necessary dilute with a small amount of water (1-2 %, 0.25-0.5l of water). The render is applied with a steel trowel with thickness of the largest grain. Depending on the desired structure, the render is then processed with a plastic trowel, namely: Full structure – structured in a circular pattern immediately after application; Reib structure – after application scratch by circular motions until the desired structure is achieved. It is necessary to work evenly and without interruption on continuous wall surfaces. See product datasheet for more detailed instructions.

NOTE

It is necessary to equalize the material required for the continuous facade surface by mixing the contents of multiple bins.

APPLICATION TEMPERATURE

From +15°C to +30°C, relative humidity max. 70 %. Do not work under direct sunlight, rain or strong wind. The facade must be adequately protected with mesh. High humidity and low temperatures can significantly extend the render bonding time.

CONSUMPTION

Approx. 2. 4-3. 3 kg/m² depending on the structure and grain size.

SHELF LIFE AND STORAGE

12 months in original sealed packing. Store at temperatures from +5°C to +25°C, protected from direct sunlight and frost.

PACKAGE

25 kg.