USE

BK-Wood Effect Extra is a tool that provides the outline of a rubber mold without the sticking of BK-Wood Effect decorative mineral mortar to the mold during installation.

PREPARATION AND APPLICATION

BK-Wood Effect Extra should be applied to the rubber mold to finely separate the mold from the BK-Wood Effect decorative mineral mortar during modeling of the wooden plank structure. BK-Wood Effect Extra is applied undiluted with a brush onto a rubber mold. After each impression, it is necessary to evenly apply a new layer of coating and, if necessary, mechanically remove the remnants of decorative mortar from the mold. Lack or insufficient amount of anti-sticking agent can lead to adhesion of the mold to the mortar, tearing of the mass and poor end effect.

APPLICATION TEMPERATURE

The temperature of the air and the substrate during installation should be in the range from +5 ºC to +30 ºC. Do not work in direct sunlight, fog, wind or rain.

SHELF LIFE AND STORAGE

18 months in the original packaging. Store at a temperature of + 5 ° C to + 25 °C, in a dry and ventilated room. Avoid direct sunlight and heat sources.

CONSUMPTION

About 0.1 l / m2 of finished mortar structure

PACKAGE

5 l