Hydro/Ceramic

Outdoor/Indoor use
For surface with direct water contact
Flexibile
For positive/negative pressure ≤ 1,5 bar

BK-HidroStop 2

Flexible two-component waterproofing coating

USE
CHARACTERISTICS
PACKAGE

Two-component, waterproofing, polymer-cement coating for horizontal and vertical protection of surfaces from moisture. It is used for waterproofing potentially damp rooms such as kitchens, bathrooms, showers, swimming pools, basements, terraces, etc. It is intended for indoor and outdoor use, suitable for positive and negative water pressure up to ≤1.5 bar. It is also suitable for insulating surfaces that are in prolonged direct contact with water.

Preparation and application :
The substrate to which BK-HidroStop 2 is applied must be solid, dust-free, free of grease, mold, and loosely bonded parts. Before applying waterproofing, it is advisable to apply the BK-Ultra Prime primer, diluted according to the instructions. In the case of old and unevenly absorbent substrates, as well as porous, highly absorbent substrates, the substrate must be coated with diluted BK-Ultra Prime at least 4 hours before waterproofing. For peeled-off, worn, and/or dusty surfaces, all loosely bonded layers must be removed and then impregnated with BK-Penetrat. Concrete surfaces must be thoroughly washed with hot water to remove impurities and then coated with BK-Beton Kontakt. The preparation of the compound is performed by lightly mixing powder component A with liquid component B without the addition of water. Allow the compound to rest for about 5 minutes and stir again to ensure proper homogenization. The application is carried out with a brush in two coats, using cross motions. If necessary, a third coat can be applied. The thickness of a single layer is approximately 1-2 mm, and the subsequent layer should be applied after the previous one has cured. Use the prepared compound within 1 hour. The waterproofing coating should be protected from rapid drying. After 12 hours from the application of the last layer, the surface is ready for laying ceramics (use flexible adhesives such as SiproFix BK-110 Flex, BK-160 Super Flex, BK-155 Rapid White, BK-170 Elastic, or BK-160 White). See the product datasheet for more detailed instructions.
Consumption :
Approximately 1.5 kg/m2/mm.
Expiration date and storage :
12 months in original packaging in dry room on pallets.
Packaging for two-component waterproofing coating :
Component A – 16.6 kg Component B – 5 kg
Component A – 16.6 kg Component B – 5 kg 

Consumption calculator


Similiar products

BUILDING. COLORING. INSPIRING.

© 2024 Banja Komerc Bekament d.o.o. — All Rights Reserved.
crossmenu