Synthetic adhesive based on polymer emulsion intended for gluing classic and lamella parquet on cement screeds, concrete and wooden substrates. It is characterized by exceptional adhesion to the substrate and good fl exibility.
PREPARATION AND APPLICATION
The substrate on which the adhesive is applied must be fi rm, clean, dry and free of old oil or paint residue. Before laying the parquet, it is necessary to prime the substrate with BK-Parket Fix diluted with about 30% water. Cement substrates must not have more than 3% moisture, and parquet no more than 8%. If necessary, the glue can be diluted with a small amount of water up to 1%, in order to adjust the consistency. The glue is applied to the substrate with a notched trowel in a layer thickness of 3-5 mm. Lay the cover and press well. Parquet sanding can be done at least 24 hours after gluing. See product data sheet for more detailed instructions.
From + 5 °C to + 25 °C.
About 1-1,2 kg/m2, depending on the type of floor covering.
SHELF LIFE AND STORAG
12 months in the original packaging. Store at temperatures from +5°C to +25°C, protected from sunlight and frost. Date of manufacture imprinted on packaging.
5 kg; 8 kg; 25 kg