Polyurethane foam for montage and bonding
Installation and gluing of windows – filling cavities (eg between blinds and walls), filling wall joints after installation of finished building elements – filling pipeline penetrations through walls and ceilings – fixing and insulation of panels, corrugated boards, tiles, etc. filling electrical installations, antenna penetrations and pipes, crossings in the roof area. It is not intended for underwater use and filling large closed holes without the possibility of moisture entering. The foam does not adhere to surfaces such as polyethylene, silicone, teflon, grease and the like.
PREPARATION AND APPLICATION
The surface must be solid, clean, free of grease and oil. Moisten well. Cover non-foam surfaces. Screw the straw onto the adapter. Turn the valve box down and press down on the valve. Fill large joints in several layers and moisten between each layer. Dose sparingly, the volume of foam increases approximately two to three times after application. To clean and remove foam residue, use a foam cleaner while the foam is still soft. Hardened foam can only be removed mechanically. See the product data sheet for detailed instructions.
From +5°C to +35°C.
SHELF LIFE AND STORAGE
18 months. Store in a dry place in the original packaging at a temperature of +5°C to +25°C, protected from sunlight and frost.
in upright position, in a dry place and at a temperature between +5°C and 25°C.
250 ml, 500 ml, 750 ml